FLAT BAR IN MALAYSIA
Stainless Steel Angle Bar
Stainless Steel Angle Bar
Mild Steel Angle Bar
Mild Steel Angle Bar
Hot Dip Galvanized Angle Bar
Hot Dip Galvanized Angle Bar

BLACK STEEL PIPES IN MALAYSIA

Chuan Foong Hardware Sdn Bhd is a supplier for all kinds of steel pipes, including black steel pipes and galvanised iron pipes (G.I. pipes).

Black steel pipes are usually used in carrying air and high-pressure steam from the source to the end user. They are mainly used in oil and petroleum industries, where oil is being transported to remote areas. You can even distribute gas between the inside and the outside of homes using black steel pipes. These pipes are low-maintenance, saving you the trouble and cost. Despite its weather-resistant characteristic, it is not ideal for transporting water, thus it is never used for drinking water.

On the other hand, G.I. pipes differ from black steel pipes because they are coated with zinc. G.I. pipes are generally more anti-corrosive; therefore, it is commonly used for water lines. G.I. pipes are suitable for sewage plumbing, and they have a life expectancy of up to 40 years. However, G.I. pipes are not used for gas transportation because the zinc can clog the lines due to its reaction with gas.

Usually, it is used to transmit heating or cooling water to other equipment. Other than that, its strength is much more than enough to hold the extreme temperature of hot and cold in the industrial industry.

G.I. Pipes
G.I. Pipes
Black Pipes
Black Pipes

CARBON STEEL FITTINGS SUPPLIER IN MALAYSIA

Carbon steel fittings are important components whenever pipes are involved. Oil, gas, pharmaceutical, biotech and food production are some of the industries that require the use of pipes, followed by steel fittings with carbon.

Carbon steel fittings act as connectors for 2 or more pipes. They can be used for pipes that are different in size, or for transporting fluids that are going in different directions. They become part of the system in transporting gases or liquids through a distance. Carbon steel is highly resistant to heat and to pressure of up to 260C and 18,000 psi respectively, depending on the type of steel grade. Steel fittings with carbon added will become more durable because carbon is one of the material that is resistant to heat. The more percentage of carbon in the products, the more resistant to heat it can be.

One of the benefits of using carbon steel fittings is that they have a lower cost than flanges due to lesser materials being used. Also, these fittings require less space because it’s more compact. From another point of view, it is environment-friendly as well as over 50% of it is recyclable after use. The sturdy and strong of it, these fittings are sure to last you a long time so that you don’t need to change it too often.

Carbon Steel Fittings
Carbon Steel Fittings

CARBON STEEL PIPES SUPPLIER IN MALAYSIA

There are many benefits when carbon steel pipes are used for industrial purposes. Firstly, they are resistant to corrosion and temperature. Their high resistance to corrosion allows acidic solutions to be transported through them, even when their temperature is very high. Manufacturers can allow fluids with a low pH value to pass through as it would not corrode the internal surface of the steel pipes.

The strength of carbon steel pipes allows them to be built in thinner diameter compared to other materials. As a result of the chemical behavior of carbon, the products that contain carbon materials inside is the strongest and it could be made as thin as possible but this will not affect the quality of the product. Thinner carbon steel pipes means lower cost because of the low amount of material required. Additionally, their ability to endure pressure and weight makes them suitable for building frames and structures. As an alternative, carbon products are eco-friendly because it can be recycled after use.

In fact, the underground pipes installed below roads are usually carbon steel pipes because of its shock resistance and endurance. Traffic above can cause a lot of vibration and put pressure on the pipes below, which can be endured by carbon steel pipes for a long time.

Carbon Steel Pipes
Carbon Steel Pipes

CARBON STEEL PIPE FLANGES MALAYSIA

As a flanges supplier in Malaysia, Chuan Foong Hardware provides carbon steel pipe flanges as well. We offer an extensive range of forged flanges such as the blind flange, weld neck, slip-on, socket weld etcetera.

Flanges are meant for connecting pipes in order to form a proper piping system. Welded or screwed, flanges make inspection, cleaning and modification works easy for engineers and plumbers. For flanged joints, a gasket is used together in order to form a seal between two flanges.

Forging carbon steel pipe flanges results in recrystallization, which causes it to undergo a grain refinement process. The defected grains are replaced, creating grains that are uniform in sizes. This, in turn, strengthens the pipe flange, allowing it to endure more impact. Moreover, the refined grains eliminate porosity, cavities and shrinkage, so the flanges can function for a longer time. Due to the atomic structure of carbon, it becomes one of the hardest material allowing you to use our products longer without the need to change frequently as well as cost saving at the same time. Besides, carbon products are environmentally-friendly because most of it are tend to be recyclable. It is durable, but you can definitely get it at affordable price.

Hesitate no more and reach us, the most reputable flanges supplier in Malaysia from now on!

Forged Flanges
Forged Flanges

CARBON STEEL PIPE MALAYSIA

Carbon steel pipes are one of Chuan Foong Hardware’s popular products in Malaysia. In Malaysia, oil and gas industries require pipes, valves, flanges and the like for their operations. When there are carbon steel pipes involved, there will be a need for forged steel fittings as well. Carbon products are long-lasting because carbon atoms can bond with each other strongly. Also, compare to other products, the product that includes carbon is cheaper and much more popular.

Our carbon steel pipes in Malaysia are inclusive of flanges, valves, gaskets that are of high quality. Forging is a process of compressing a piece of metal into a desired shape under a certain temperature depending on the type of metal to be made. Our stringent and detailed forging process guarantees excellent standards of all types of steel fittings.

Being a reliable hardware supplier in Malaysia, we strive to offer finest quality forged steel fittings for your industry usage. Forged steel in another words known as iron and carbon’s alloy. In consideration of its chemical behavior, it becomes more reliable and even stronger. On top of that, they are made of metal materials causes their lighter weight and durable in product features. It has the advantage of strength from iron and stability from carbon materials, thus it is in the help of cost savings.

Forged Steel Fittings
Forged Steel Fittings

MALLEABLE IRON PIPE FITTINGS MALAYSIA

As a gasket supplier in Malaysia, Chuan Foong Hardware also offers malleable iron pipe fittings in order to fit all your pipes perfectly. Our galvanised iron pipe fittings are threaded according to the British Standard Pipe Thread (BSPT), therefore it cannot be used with National Pipe Thread (NPT) or British Standard Parallel Pipe (BSPP). Although an NPT male can still fit into a BSPT female, but it isn’t suitable as they will not seal. Only a male and female that are of the BSPT can connect securely and become sealed together.

It is also known as white cast iron as well. While it was heated and it will be cooled slowly. Along with that, the tensile strength value of it is very high so that it is stable for every usage. It is reliable, and it has been used in emergency systems generally. Due to the tensile strength value, it also used in machine construction for industry needs. It used to resistant the heat commonly.

Our malleable iron pipe fittings come with sizes as small as 1/8” until 8”. Our iron pipe fittings are inclusive of 45ºelbows 90ºelbows, reducing tee, reducing straight cross and many more.

Do contact us, the well-known gasket supplier in Malaysia for more details and quotations.

Socket, Banded, Equal
Socket, Banded, Equal
Plug, Equal
Plug, Equal
Hexagon Nipple
Hexagon Nipple
Hexagon Nipple, Reducing
Hexagon Nipple, Reducing

SGP PIPE AND FITTINGS IN MALAYSIA

The carbon steel pipe fittings that we provide are included in the SGP pipe and fittings category, which indicates that they are meant for pipes that convey fluids in low working pressures. These SGP pipe and fittings are catered to black pipes and galvanised pipes. They are suitable for pipes of different dimensions. From as thin as 2.0 mm to 7.9 mm, Chuan Foong Hardware possesses these items in order to serve you at our best.

Besides, this is one of the best pipes out in the market for industry purpose and our pipes are made by competent and well-trained professionals which make the pipe to be superior and of high quality. Then, even though our pipe is extremely high quality but we are still selling it at a reasonable price because we want everyone to be able to purchase and use our products.

Our SGP pipe and fittings are designed specifically to transport liquids or fluids such as oil and gas via long distance for those lengthy pipes as they are tough and durable. Apart from this, the special feature of this type of pipe is strong heat and cold resistance. It is designed for industrial industry usage for transmitting gas to another equipment.

Contact us now for more information on the specifications of our SGP pipe and fittings.

SGP Fittings
SGP Fittings
SGP Fitting Electro-Galvanized
SGP Fitting Electro-Galvanized

STAINLESS STEEL SCREW END FITTINGS MALAYSIA

Stainless steel screw end fittings are one of the popular products of Chuan Foong Hardware mainly due to its material. Stainless steel is anti-corrosive, and is suitable to be used in a lot of industries. Stainless steel is very durable, therefore it can be used for both high pressure and low pressure compression fittings.

The benefits of stainless steel products include it is resistant to corrosion. There are 10.5% or more of carbon materials contained inside the stainless steel make it more durable and so corrosion resistance. The materials will slow down Oxidize when it is exposed to air in the surrounding. Our stainless steel screw end fittings come in many sizes in order to cater to the needs of different industries such as oil, gas, chemicals etcetera. The screw end fittings that we provide can withstand a maximum pressure of about 10,000 psi.

It is considers as scratched resistance as well due to it is easy to clean up. Besides, it is also strong enough to use while you are working under high or low temperature. In fact, stainless steel is one of the green materials because it can be recycled completely. It is designed for you not to change it frequently and it helps to save money at the same time.

What are you still waiting for? Purchase now!

Stainless Steel 150# BSPT Screw End Fittings
Stainless Steel 150# BSPT Screw End Fittings

STAINLESS STEEL BUTT WELD FITTINGS SUPPLIER MALAYSIA

Butt weld fittings are used in piping systems to change direction of the flow, distribute the fluid to other branches or connect equipment to the piping system. Our stainless steel butt weld fittings are high quality and durable, and we are always getting large order quantities for this. Apart from this, the butt weld fittings we manufacture are made by our well-trained and qualified workers. Hence, the stainless steel butt weld fittings that we produce are perfectly made, we always treat all of our products with great care so that It would remain the premium quality for consumers.

The size range of our stainless steel butt weld fittings is from ½” to 24”, with schedules of 10, 40, 80 and so on. They also come in many types like elbows 90º, elbows 45º, tees and much more, so you will need to check on the measurements properly before purchasing.

On the other side, it is extremely important to have excellent quality stainless steel butt weld fittings because if it is not in good condition, it might ruin the entire piping systems which may cause huge problems which nobody would want it to happen, we promise that our butt weld fittings are in great conditions so there you no need to worry that issues will arise in the piping systems.

Stud End / Lap Joint
Stud End / Lap Joint
Stainless Steel Butt Weld Fittings
Stainless Steel Butt Weld Fittings

STAINLESS STEEL PIPE FITTINGS SUPPLIER IN MALAYSIA

Stainless steel pipes match perfectly with stainless steel pipe fittings. Stainless steel is easy to be cut, machined and formed, therefore the fabrication process is very quick. This ensures a faster arrival of your orders of stainless steel pipe fittings. Additionally, stainless steel can withstand very high and very low temperatures, further expanding its usage in many types of industries.

In addtion, the corrosion resistance of stainless steel pipe fittings enables them to be used for the manufacture of food, medical tools, agricultural fertilizer and more. The reason why we chose to use stainless steel is because it is the perfect material to produce the pipe fittings, it is easy to cut so that we can produce the pipe fittings precisely so it would fit perfectly.

Additionally, it contains chromium with it. Because of the chromium, so when oxygen combines with it, it will have an invisible layer called “Chromium Oxide”. The Chromium Oxide will prevent the oxidation. Besides, its advantages are non-toxic and safe. It is safe to apply under toxic environment. Also, stainless steel pipe fittings are eco-friendly because they are easy to clean and stainless steel is a recyclable material.

We offer a range of pipe sizes which are different in terms of length and thickness. Feel free to contact us for more information on the stainless steel pipes fittings that we have in store for you.

Stainless Steel Pipes
Stainless Steel Pipes
Switch To Desktop Version